TYLER BUILDING SYSTEMS, L.P.
Tyler Building Systems, L.P.
3535 Shiloh Road
Tyler, Texas  75707
Phone:800-442-8979
Fax: 903-561-7686
Location Map
Architectural Panels

Tyler Building Systems, L.P. offers a broad range of Architectural panels to meet the construction needs of the design professional.

Craftsman™ Series
The Craftsman™ Series is a water shedding panel system and can be used for roofs and mansards only when installed over a waterproofed solid substrate and the roof has a minimum slope of 3:12.

SB12

LB12

HB12
16 1/2" also available

Artisan™ Series
The Artisan™ panel can be vertical, horizontal, perpendicular, or skewed to the building line, allowing the designer multi-dimensional freedom to create. The Artisan™ panels are used for soffit and interior liners. Panels can be attached to a light gauge framing or a waterproofed solid substrate.

L12

L12 with beads
8" and 10" also available

FlexLoc
FlexLoc panels can be used for soffit systems or barrel vault roofs. On barrel vault roofs, FlexLoc panels should be attached to a waterproofed, solid substrate. When used as a fascia, panels can be applied to light gauge framing.
8 1/2" and 9 1/2" also available

Traditional™Series
The Traditional™ Series is a water shedding panel system and can be used for fascias, mansards and equipment screens. The Traditional™ Series is not recommended to be used as a roof system.

S12-C 


B12-C
12" only

Architectural Wall Panels
The FW panel can be used in a single skin application or as a component of a composite wall system. The IL Panel profiles allow for installation as the liner of a composite wall system or, installed to the inside girts of a building as a concealed fastener interior liner. The ILM liners do not have the interlocking side joint feature of the IL panel and are used as the interior liner in a field assembled system only.

FW-120-2 with beads

IL-240-3 with beads

ILM-240-3 with beads

QuikLok™
QwikLok™ is ideal for under hung applications. No more fighting with trying to install two panels at one time. Unlike conventional roofing cover, QwikLok™can be assembled from the underside of the structure, one panel at a time.
NuWall™
NuWall™ is ideal for both new and retrofit applications. Can be installed over an existing "R" or "U" panel wall. This save both labor and material.
ShadowRib™
The ShadowRib™ panel can be used for walls, fascias, and equipment screens. Apply the panel over light gauge framing, purlins, girts, structural steel, or joists. In many instances, the panel can span from floor to ceiling without interior supports, making is ready to apply a variety of insulation methods in the three inch cavity.

Classic™ Series
This versatile panel can be attached to either the top or bottom of the roof structural system whether it is light gauge framing, purlins, girts, structural steel, or joists.

P12 (Roof)
16" also available
Color Chart
Tyler Building Systems, L.P. offers a wide range of panel and trim colors.
 
 
Should you experience any difficulty using this website or would like to make suggestions on enhancements
 to our existing site, please feel free to e-mail us at webmaster@tylerbuilding.com
Copyright ฉ 2009 Tyler Building Systems, L.P. 
Last modified: October 01, 2009